How to Convert a USB Printer to Wireless Printer?
Want to convert your USB or wired printer into a wireless printer, then you can do this with Print Server.
Read more: https://www.printeralign.com/convert-usb-printer-to-wireless
George More commented
Talking about printers, you can connect them not only to computers but also to other devices like cameras, laptops, pen drives, etc. With the advancement of technology, you can now find wireless printers and connect them easily over the internet. But nothing beats the good old cable connection. So, in this article, we will see different types of cables for printers as well as monitors. Get to know for connect canon mg3620 to wifi
william joe commented
Before you get started, you need to have a working printer at your disposal. It would be best to have an internet-connected computer or a modem or router with a USB port. Lastly, it would be best if you also had an ethernet cable at your disposal.
Wireless Print Server
One of the easiest and most convenient ways to make your USB printer a wireless printer is to use a small device known as the wireless print server. It is a small box that offers the ability to make your wired printer wireless. All you need to do is put the printer in a place where it is accessible by everyone and from there. Once done, plug in the Wireless Print Server, and you are good to go!
To make sure the Wireless Print Server is working as intended, use the same wireless network for both. If both connect to different wireless networks, then the connection will not work. But, what happens if you have multiple HP printers or other brand printers? Will one Wireless Print Server work? Well, sadly, it won’t. So, you need to get each printer it’s Wireless Print server and connect them with a USB cable.
The USB-only printer has not transformed into a wireless one. In theory, you should be able to use the printer from anywhere in your house. Amazon.com offers a good collection of Wireless Print Server, and you can pick one according to your budget to get started.
Router-Connected USB Printer Using Wireless Network
The current generation router comes with a USB port on its back. If your router also has a USB port, then you can use it to your advantage. To make sure that your router has the port, check its back or side. You can use a USB to USB cable to connect your USB printer to the modem/router if you see one.
You can also opt for a USB to Ethernet adapter if needed. This is required only for routers that don’t have a USB port. The USB to ethernet adapter enables you to connect the printer to the router using the ethernet port. These adapters are easy to find from online shopping platforms such as eBay or Amazon. You can also check out your local store.
As the USB-to-USB cable or the USB to Ethernet cable are short, you need to place the printer near your router. Also, make sure that you do not bend the cable while connecting the two devices. Once both the devices are closed, now connect the cable according to the ports. In the case of a USB-to-USB cable, you can connect the cable to your printer or router in any order. However, for USB to Ethernet, you need first to plug the adapter to the router’s Ethernet port and then the other end to the router.
Next, you need to plug in the power cord to the printer and then power on the printer. Now, you need to wait for the printer to be identified by the router as a device. You should give at least five to ten minutes for the process to complete.
Now you need to attempt to connect to the printer from the host computer. For that, you need to follow the below-mentioned steps.
Open the Start menu on your Windows
Now go to Settings and then click on Devices.
From there, click Printers and Scanners
Now click on “Add a printer or scanner.”
Next, select Wireless printer and Add Device.
If you are on a MAC, then you need to go to System Preferences >> Printers and Scanners >> Click on the Wireless printer icon on the left and then click Add.
Double-check if the printer is connected by going to the printer setup.
Using Host Computer on Windows
If you cannot connect your USB printers to Windows using the above method, you need to use your host computer to connect the printer. This will make your host computer act as a wireless source for the printer to work.
The steps to do so are as below:
First, you need to connect your USB-connected printer to your computer using a USB cable.
Power on the printer
The computer should recognize the printer, and you need to follow the on-screen prompts. It may ask you to download the driver or install it yourself.
Now click the Start button on Windows.
Go to Control Panel and click on “Network and Internet.”
Click on “Change Advanced Sharing Settings” on the left menu
From there, toggle, “Turn on file and printer sharing.”
Now click on “Save changes.”
Again go back to “Control Panel” and select “View devices and printers.”
From there, right-click on your connected printer.
Next, click on Printer properties.
In the Printer properties, you will find “Sharing.”
Turn on “Share the printer” and “Render print jobs on client computers.”
To finally share the printer on the network, you need to try again connecting to the printer using WiFi with the same Wi-Fi network as the host computer. Go to “Start” >> “Settings” >> “Devices” >> “Printers and Scanners” and then “Add a printer or scanner”